OK, the wait is finally over for the upgrade we have been promising.

Before I even get into the main announcement, I thought I should bring something else small to your attention. We just made a large investment in our server farm infrastructure, and have increased server performance by a factor of almost 6 times! For instance, the CUCM CallManager Service Parameter’s web page used to take around 60 seconds to load.

Read Full Entry »

Tags: 3.0 blueprint, CCIE, Load Lab Configs, Proctor Labs, Proctorlabs, v3, Voice, vRack

Many folks have requested the ability to be able to log into the Proctorlabs web UI and interact with a “demo” vRack before they purchase a rack session. It would give them the ability to “test-drive” our acclaimed web UI and easy-to-use controls before they purchase. Well in response to many requests, I have setup such a vRack for access.

Starting out with Voice v3 vRacks, we now have a permanent demo vRack that can be logged into at any time using our standard web UI, giving the viewer complete simulated functionality over what would be an otherwise actual Voice vRack. Being that there is actually no hardware hanging behind this demo vRack – there are a few things that will not show up, such as “status” for any device. Of course you also will not be able to telnet to any router, or log into any CUCM Server or otherwise. However you will get a good feeling for what your actual vRack session will be like when you rent from us – and you will be able to see the changes we have made in terms of features such as “Load Lab Configs” and “PSTN MAC Address and Phone Type” configuration.

Read Full Entry »

Tags: ccie 3.0, Cisco, hardware, ipexpert, Proctor Labs, software, Voice, VPN, vRack, web ui