Another Voice 3.0 Lab Ready and Posted!
By Mark Snow on Tuesday, March 3, 2009 15:14Posted in category CCIE, General Announcements, News, Proctor Labs, Product Updates, Products, Voice, Voice Product Updates
Voice v3 test takers, another lab is upon you. Lab 4A (Config Labs) and 4B (Troubleshooting Labs) are completed and uploaded to IPexpert.com. Also other previous labs have been updated and enhanced, so download them again to be sure you have the latest updates.
Check your IPexpert.com Members area under the ‘My eBooks’ section for the Workbook and Proctor Guide (detailed PDF solutions) and also under the ‘My Configs’ section for the router/switch text file solutions. The corresponding ‘Initial’ and ‘Final’ configs have also been loaded up into the Proctorlabs.com Voice v3 vRack UI as well – and are ready for your use.
Lab 5A and 5B are under way and should be available very shortly, so stay tuned!
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
All quiet on the western front (but busy out east!) « CCIE Lab Preparation says:
March 6th, 2009 at 5:16 am
[...] so what does this mean for my studies and this blog? Well I see that IPexpert are releasing more V3 blueprint Volume 1 labs – which is great. I will certainly be looking at these once I sort out my connectivity issues and [...]
scott c says:
March 6th, 2009 at 8:28 am
Mark – if I am not able to see the new labs would it be because of a account issue that I would need to contact sales/support regarding? When I log in and go to the members area I only find the following –
CCIE Voice Lab Preparation Volume 1-3 Tables
CCIE Voice Lab Preparation Workbook Volume 1 (By Section)
CCIE Voice Lab Preparation Workbook Volume 2 (By Section)
CCIE Voice Lab Preparation Workbook Volume 3 (By Section)
Wayne Lawson II says:
March 6th, 2009 at 10:18 am
Scott – if you contact support@ipexpert.com – they’ll ensure you have access to the latest files. Thanks! – Wayne
Daryl Smith says:
March 8th, 2009 at 6:25 pm
Mark I have a question
After I watched your video on transcoder and conference bridge.
Ok I was doing some labbing today, and making sure I used the Cisco link
http://www.cisco.com/web/psa/products/index.html?c=278875240
which refers to the document that you can use on the exam. The question I have is will this link be on the exam. This was the navigation I used and I found an interactive page with CUCM/Unity/IOS gateways/SRST/QoS and alot more!!!
Steps listed below
1. Select Voice and Unified Communications
2. Select IP Telephony (Call Control)
3. Select Cisco Unified Communications Manager (CallManager)
4. From the CUCM page select – Configuration Examples and Technote (181)
5. Under Cisco Unified CallManager Version 4.1 select MGCP IOS (RTP) Interactive Voice Network Configuration Example!!!!!!
for those that want the quick link
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00807f8b70.shtml
So let me know if this link is available on the exam.
Thanks
It will help save time after tweeking the command to the questions asked.
Vik Malhi says:
March 10th, 2009 at 7:28 pm
I don’t think you get the TechNotes and Config Examples in the lab- just the configuration/installation guides.
Now this is not via any solid source- just word of mouth so completely unconfirmed.